Fiat DOBLO 2015, Owner'S Handbook Manual

Page: 139 / 244

137
ensure that it rotates freely in order to
avoid grazing your hands against the
ground. The moving components of
the jack (screws and joints) can also
cause injuries: avoid touching them. If
you come into contact with lubricating
grease, clean yourself thoroughly;
fully loosen the fixing bolts and
remove the wheel;
make sure the contact surfaces
between spare wheel and hub are
clean so that the fastening bolts will not
come loose;
fit the standard wheel by inserting the
first bolt (B) fig. 189 two threads into
the hole closest to the inflation valve
(A);
189
F0V0157
fit the hub cap, making sure that the
symbol (on the cup) aligns with the
inflation valve, and then insert the other
three bolts;
tighten the bolts using the spanner
provided;
turn the jack handle to lower the
vehicle, and remove the jack;
use the wrench provided to fully
tighten the bolts, passing alternately
from one bolt to the opposite one, as
per the numerical sequence illustrated
in fig. 190.
190
F0V0158
At the end of the operation
fix bracket (A) fig. 191 to the wheel
after passing it through the hole, insert
the threaded pin into one of the bolt
holes and secure by tightening knob
(B);
191
F0V0194
for vehicles with alloy rims take the
adapter (D) fig. 192 and fit the plastic
spacer (C) between the spring and
the flange of the bracket. The plastic
fin must be directed downwards and
perfectly coincide with the flange cut
part;
192
F0V0214
fit the bracket (E) fig. 193 in the
adapter (D), fit the pin in the hole and
fasten by the knob (F);
193
F0V0215
position the wheel vertically and rest
the fitted adaptor on the inside of the
rim, then using the screws provided