Fiat DOBLO 2015, Owner'S Handbook Manual

Page: 23 / 244

21
WARNING Always disconnect the
connection and fasten it to the seat
using the dedicated tape, to prevent it
from being damaged when moving the
seat.
NOTE Always reconnect the electrical
connection for the two 3rd row seats
when they are refitted in the vehicle.
34
F0V0632
pull the tape (B) fig. 30 behind the
seat backrests and fold the seats and
the backrests forwards;
position the head restraint using the
openings under the cushion to insert
the rods;
push the lever as indicated in fig. 35;
remove the seat from the
attachments on the floor.
35
F0V0206
3rd ROW SEAT
REPOSITIONING
Proceed as follows:
attach the hooks to the floor fig. 36;
36
F0V0207
push the lever as illustrated in fig. 35
and pull it to make sure that the seat is
still correctly secured;
identify the electric connection of the
seat constrained by the elastic tape
fig. 34 present in the left side zone (for
the left seat) or in the right side zone
(for the right seat) of the backrest;
pull the elastic tape fig. 34 and
remove the electric connection from
the seat;
extend the wiring exiting from the
seat to the connection of the vehicle
located in the left side zone (for the left
seat) or the right side zone (for the right
seat) fig. 37;
connect the connection of the seat
(A) to the connection on vehicle and
turn the ring present on the seat
connection clockwise (until it locks);
37
F0V0634
withdraw the head restraint under the
cushion;
fold the cushion and the backrest
over;
reposition the head restraint;
reposition the rolling curtain in its
housing.
WARNING Make sure that the seat is
properly secured to the fastenings on