Fiat DOBLO 2015, Owner'S Handbook Manual

Page: 136 / 244

IN AN EMERGENCY
134
WARNING
119) If the replaced fuse blows again,
contact a Fiat Dealership.
120)
Never replace a fuse with another
with a higher amp rating; RISK OF FIRE. If
a general protection fuse (MEGA-FUSE,
MIDI-FUSE) is activated, contact a Fiat
Dealership. Before replacing a fuse,
make sure that the ignition key has been
removed and that all the other services are
switched off and/or disengaged.
121) Contact Fiat Dealership if a safety
system (airbags, brakes), engine system
(engine, transmission) or steering system
general protection fuse blows.
IMPORTANT
39)
Never replace a faulty fuse with metal
wires or anything else.
40) The Comfort-Matic/Dualogic system
components are protected by specific
fuses. Contact a Fiat Dealership for
replacement.
41) The Natural Power system
components are protected by specific
fuses. Contact a Fiat Dealership for
replacement.
42)
If you need to wash the engine
compartment, take care not to directly hit
the fuse box and the window wiper motors
with the water jet.
REPLACING A
WHEEL
The vehicle is originally equipped with
the Fix&Go automatic quick tyre repair
kit (see instructions in the next section).
As an alternative, the vehicle may have
a normal-sized spare wheel.
Wheel changing and correct use of
the jack and spare wheel call for some
precautions, as listed below.
122) 123) 124) 125)
Note for one-way tyres
One-way tyres have a few arrows
on the side indicating the rotation
direction. If a wheel is changed (when
punctured, for example) the direction of
the arrows on the spare wheel tyre may
not coincide with the rotation direction
of the wheel to be replaced.
In these conditions, too, the tyre still
maintains its safety features.
Anyway, it is recommended to have the
wheel repaired and refitted as soon as
possible, as the best performance is
achieved when the rotation direction
of all tyres coincides with the one
indicated by the arrows.
JACK
Please note that:
the jack weight is 4 kg;
the jack requires no adjustment;
the jack cannot be repaired and in
the event of a fault it must be replaced
by another genuine one;
no tool other than its cranking device
may be fitted on the jack.
WHEEL REPLACEMENT
PROCEDURE
To change a wheel, proceed as
follows:
stop the vehicle in a position that is
not dangerous for oncoming traffic
where you can change the wheel
safely. The ground must be flat and
sufficiently compact;
switch off the engine and pull the
handbrake;
engage first gear or reverse;
wear the reflective safety jacket
(compulsory by law in certain countries)
before getting out of the vehicle;
indicate that the vehicle has broken
down using the devices required by the
law in the current country (e.g. warning
triangle, hazard lights, etc.);
for Cargo versions fig. 177: move the
left front seat forward and operate lever
A to access the tool bag; take it to the
wheel that needs replacing;