ENHANCED ACCIDENT RESPONSE SYSTEM RESET PROCEDURE
After the event occurs, when the system is active, a message regarding fuel cutoff is dis-
played
.
Turn the ignition switch from ignition AVV/START or MAR/ACC/ON/RUN to igni-
tion STOP/OFF/LOCK
.
Carefully check the vehicle for fuel leaks in the engine compart-
ment and on the ground near the engine compartment and fuel tank before resetting
the system and starting the engine
.
Depending on the nature of the event the left and right turn signal lights, located in the
instrument panel, may both be blinking and will continue to blink
.
In order to move your
vehicle to the side of the road, you must follow the system reset procedure
.
Customer Action
Customer Will See
1
.
Turn Ignition OFF
.
(Turn Signal Switch
Must Be Placed In Neutral State)
.
2
.
Turn Ignition ON
.
Left Turn Light Is OFF
.
Right Turn Light
BLINKS
.
3
.
Turn Right Turn Signal Switch ON
.
Right Turn Light Is ON SOLID
.
Left Turn
Light BLINKS
.
4
.
Turn Left Turn Signal Switch ON
.
Left Turn Light Is ON SOLID
.
Right Turn
Signal Light BLINKS
.
5
.
Turn Right Turn Signal Switch ON
.
Right Turn Light Is ON SOLID
.
Left Turn
Light BLINKS
.
6
.
Turn Left Turn Signal Switch ON
.
Left Turn Light Is ON SOLID
.
Right Turn
Light Is ON SOLID
.
7
.
Turn Left Turn Signal Switch OFF
.
(Turn
Signal Switch Must Be Placed In Neutral
State)
.
Left Turn light Is OFF
.
Right Turn Light is
OFF
.
8
.
Turn Ignition OFF
.
9
.
Turn Hazard Flashers OFF (Manually)
.
System is now reset and the engine may
be started
.
If a reset procedure step is not completed within 60 seconds, then the turn signal lights
will blink and the reset procedure must be performed again in order to be successful
.
GETTING STARTED
20
Summary of Contents for 2016 500X
