Turning Brake Control ON Or OFF
The Brake Control menu setting is located in the Uconnect settings
.
NOTE:
The default status of Brake Control is “W Active Braking,” this allows the system
to warn you of a possible collision with the vehicle in front of you and enable the active
braking
.
•
Changing the Brake Control status to “Off” deactivates the system, so no warning or
active braking will be available in case of a possible collision
•
Changing the Brake Control status to “Only warning” prevents the system from pro-
viding limited active braking, or additional brake support if the driver is not braking
adequately in the event of a potential frontal collision, but maintains the audible and
visual warnings
.
Changing the status of the system is only possible with the vehicle at a complete stop
.
NOTE:
The Brake Control system state is not kept in memory from one key cycle to the next
.
If
the system is turned OFF, it will turn On when the vehicle is restarted
.
Changing Brake Control Sensitivity
By changing the settings on the menu of the Uconnect system, you can change the sensi-
tivity of the system by choosing one of the following three options: "Near", "Medium" or
"Far"
.
Refer to “Multimedia” in the Owner’s Manual on the DVD for further information
.
The default option is "Medium"
.
This setting provides that the system notify the driver of
a possible accident with the vehicle ahead of it when the latter is at a standard distance,
intermediate between the other two possible settings
.
By setting the sensitivity of the system to "Far", the system will warn the driver of a pos-
sible accident with the vehicle in front when the latter is at a greater distance, giving you
the chance to act on the brakes in a more limited and gradual
.
This setting gives the
driver the maximum possible time of reaction to prevent a possible accident
.
By changing the option to "Near", the system will warn the driver of a possible accident
with the vehicle ahead of it when the latter is a reduced distance
.
This setting offers a
reaction time to the driver lower than the settings "Medium" and "Far", in the case of a
potential accident, while a more dynamic driving of the car
.
The setting of the sensitivity of the system is maintained in memory when the engine is
switched off
.
OPERATING YOUR VEHICLE
56
Summary of Contents for 2016 500X
