Fiat 2016 500X, User Manual

Page: 63 / 204

Left Lane Departure — Both Lanes Detected
• When the LaneSense system is ON, the lane lines turn from gray to white to indicate
that both of the lane markings have been detected . The LaneSense indicator is solid
green when both lane markings have been detected and the system is “armed” to pro-
vide visual warnings in the EVIC and a torque warning in the steering wheel if an unin-
tentional lane departure occurs
.
• When the LaneSense system senses a lane drift situation, the left thick lane line and
left thin line turn solid yellow . The LaneSense indicator changes from solid green to
solid yellow
.
At this time torque is applied to the steering wheel in the opposite direc-
tion of the lane boundary .
For example: If approaching the left side of the lane the steering wheel will turn to the
right
.
• When the LaneSense system senses the lane has been approached and is in a lane
departure situation, the left thick lane line flashes yellow (on/off) and the left thin line
remains solid yellow
.
The LaneSense indicator changes from solid yellow to flashing yel-
low . At this time torque is applied to the steering wheel in the opposite direction of
the lane boundary
.
For example: If approaching the left side of the lane the steering wheel will turn to the
right
.
NOTE:
The LaneSense system operates with the similar behavior for a right lane departure .
Changing LaneSense Status
The LaneSense system has settings to adjust the intensity of the torque warning and the
warning zone sensitivity (early/late) that you can configure through the Uconnect system
screen
.
NOTE:
• When enabled the system operates above 37 mph (60 km/h) and below 112 mph
(180 km/h) .
• Use of the turn signal suppresses the warnings
.
• The system will not apply torque to the steering wheel whenever a safety system en-
gages . (anti-lock brakes, traction control system, electronic stability control, forward col-
lision warning, etc
.
)
.
OPERATING YOUR VEHICLE
61