Fiat 2016 500X, User Manual

Page: 90 / 204

Setting The Time
Model 6
.
5AN synchronizes time automatically via GPS, so should not require any time
adjustment
.
If you do need to set the time manually, follow the instructions below
.
• For Model 6 . 5AN, turn the unit on, then press the time display at the top of the
screen, a pop-up will ask if you want to set the time
.
Press “Yes
.
”
• If the time is not displayed at the top of the screen, push the Settings button . In the
Settings screen, press the “Clock” button on the touchscreen, then select “ON” for
“Show Time Status
. ”
• Press “+” or “–” next to Set Time Hours and Set Time Minutes to adjust the time
.
• If these features are not available, press “Off” for Sync with GPS .
• Press “X” to exit out of the Clock Setting screen
.
Audio Settings
• Press the “Audio” button on the touchscreen to activate the Audio settings screen to
adjust Balance\Fade, Equalizer, and Speed Adjusted Volume .
• You can return to the Radio screen by pressing the “X” or back arrow located at the
top right .
Balance/Fade
• Press the “Balance/Fade” button on the touchscreen to Balance audio between the
front speakers or fade the audio between the rear and front speakers .
• Pressing the “Front,” “Rear,” “Left,” or “Right” buttons on the touchscreen or press and
drag the Speaker Icon to adjust the Balance/Fade .
Equalizer
• Press the “Equalizer” button on the touchscreen to activate the Equalizer screen
.
• Press the “+” or “-” buttons on the touchscreen, or press and drag over the level bar
for each of the equalizer bands
.
The level value, which spans between plus or minus 9,
is displayed at the bottom of each of the Bands .
Speed Adjusted Volume — If Equipped
• Press the “Speed Adjusted Volume” button on the touchscreen to activate the Speed
Adjusted Volume screen . The Speed Adjusted Volume is adjusted by pressing the “+”
and “–” buttons or by pressing and dragging over the level bar
.
This alters the auto-
matic adjustment of the audio volume with variation to vehicle speed
.
Surround Sound — If Equipped
• Press the “Surround Sound” button on the touchscreen, select “On” or “Off” followed
by pressing the back arrow button on the touchscreen
.
When this feature is activated,
it provides simulated surround sound mode .
ELECTRONICS
88