Fiat 1995 Brava, Service Manual

Page: 449 / 544

B r a k i n g s y s t e m
Rear brakes
Bravo-Brava
33.
BRAKE PRESSURE PROPORTIONING
VALVE
Removing-refitting
To remove the brake pressure proportioning
valve, proceed as follows:
1. disconnect the exhaust pipe end section
mounting;
2. disconnect the exhaust pipe intermediate
section mounting;
3. undo the bolts and remove the heat shield
from the exhaust pipe to facilitate access
to the brake pressure proportioning valve;
4. uncrew the brake hose connections
and disconnect the spring indicated;
The connectors fitted on the brake
pressure proportioning valve are
11 and 13 mm; use the spanner
1856132000 for the 11 mm ones,
and for the 13 mm ones use an
open spanner taking care not to
damage the connectors.
P4A030D04
30
Publication no. 506.670