Fiat 1995 Brava, Service Manual

Page: 339 / 544

Bravo $
20v
Gearbox and differential
Removing-refitting
2 1 - 2 7 .
1. Rear attachment of gearbox support tool
1860873000.
2. Remove the engine mounting, gearbox side.
3. Manoeuvre the hydraulic jack as appropri-
ate in order to disengage the gearbox from
the attachment studs and surrounding
parts. Gradually lower the jack and with-
draw the gearbox.
Refitting
4. When fitting the engine mounting, gear-
box side, to avoid creating stresses on the
sealing surfaces between the mounting
and the gearbox, resulting in deformation
and subsequent oil leak, closely follow the
bolt tightening sequence below:
- Tighten bolts (1) and (2) to a prelimi-
nary torque di 0.5 daNm;
- Tighten bolts (3) and (4) to a prelimi-
nary torque of 0.5 daNm, then tighten to
the specified torque;
- Tighten the bolts (1) and (2) to the
specified torque.
For the remaining refitting operations, re-
verse the procedure described for removal.
Before fitting the bellhousing in the car,
check that the clutch release bearing is
positioned correctly on the gearbox main-
shaft.
A
The oil level in the gearbox must be 9
mm below the oil filler plug hole.
Copyright Fiat Auto
5 7