background image

 

1

 

 

 

VERONA

by FIAMMA Manufacturing llc

 

 

Gas Burner System

   

 

 
If for any reason, you cannot follow these instructions, 

FOR 

ANY REASON WHATSOEVER

Please hire a plumber or Qulified Installer 

 

³3/($6(´

 

do 

not use this product if you cannot follow these instructions.   
 

 

The Verona Burner System

 

is designed, and intended, for 

installation in an existing  approved, fully vented, wood-burning 
fireplace, which includes gas hook-up.  Gas Control Valve units 
may be fueled by, either Natural Gas or Liquid Propane.  Liquid 
Propane must be orderd as such, DO NOT Connect the Unit with 

 

 

GENERAL INFORMATION

 

 
These instructions are intended as a general guide and do not 
supersede national or local codes in any way.  Authorities 
having jurisdiction should be consulted before installation. 
 
Installation and provision for combustion and ventilation air 
must conform to the 

National Fuel Gas Code, ANSI 

Z223.1/NFPA 54

, or 

CAN/CGA-B149.1

Natural Gas 

Installation Code

, or 

CAN/CGA-B149.2

Propane Installation 

Code

.   

!!! IMPORTANT !!! 

Read these instructions carefully before installing or operating 
this gas appliance.  These instructions should be left with the 
homeowner for future reference. 

INSTALLER:

 Leave this manual with the appliance. 

CONSUMER:

 Retain this manual for future reference. 

 

!!!

 

WARNING

 

!!!

 

If the information in this manual is not followed exactly, a fire or 
explosion may result causing property damage, personal injury 
or loss of life.

 

 

!!!

 

WARNING

 

!!!

 

This appliance must be installed only in a solid-fuel burning 
fireplace with a working flue and constructed of non-
combustible materials.  This unit is NOT

 

for use with solid fuel.  

Solid fuels shall NOT

 

be burned in a fireplace where a 

decorative appliance is installed.

 

 
 
 
 
 
 
 
 
 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

   

 

 

 

   

 

   

 

 

   

 

 

 

  

 

   

 

   

 

 

 

   

 

 

  

 

   

 

 

 

 

   

   

 

 

 

   

 

 

 

 

    

 

 

     

   

 

 

    

   

 

 

 

 

 

 

 

  

 

 

 

 

 

 
 

 

WHAT TO DO IF YOU SMELL GAS:

 

 

<  

 

Do not try to light any appliance.

 

 

<  

 

Do not touch any electrical switch; do

 

not use 

any phone in your building.

 

 

<  

 

Immediately call your gas supplier

 

from a 

QHLJKERU¶VSKRQH

.  Follow the gas s

XSSOLHU¶V

instructions.

 

 

<  

 

If you can not reach your gas supplier, call the 
fire department.

 

 

Do not store combustible materials or use gasoline 
or other flammable vapors and liquids in the vicinity 
of this or any other appliance.

 

 

Installation and service must be performed by a:  
Qualified technician, service agency, or the gas 
supplier.

 

 

 

 

      

 

 

 

 

   

 

 

 

 
 
 
 
 
 

 

LLC.

any fuel other than is intended ! 

!!! DANGER !!!

NEVER OPERATE THIS APPLIANCE WITH

FIREPLACE GLASS DOORS CLOSED !

MADE IN CONNECTICUT !

DO NOT INSTALL IN A WOOD BURNING STOVE

NEVER OPERATE WITH CLOSED GLASS DOORS !

Your unit was test fired and Inspected prior to shipment.

Any discoloration on the Burner or pilot is due to the test fire

Summary of Contents for VERONA












Reviews: