Fiamma VERONA, Installation And Operation Instructions Manual

Page: 10 / 11

9
SYSTEM TROUBLE SHOOTING
PROBLEM OBSERVED POSSIBLE CAUSE CORRECTIVE MEASURE
Gas odor during set up Gas leak See " What to do if you smell gas " page 1
Check all gas connections
Gas odor before first ignition Gas leak See " What to do if you smell gas " page 1
Check all gas connections
Pilot will not ignite, or will not stay lit No gas to pilot
Make sure gas is on, in pilot position
Thermocouple not hot
Depress valve knob for at least 1 minute
Improper pilot flame adjustment
See Pilot Characteristics - adjust flame
Loose connections on thermocouple
Check gas connections
Faulty pilot or thermocouple
Replace Safety Pilot
Faulty Valve
Replace Valve
Delayed ignition Low gas pressure Check gas supply pressure
Clogged or dirty burner ports Clean burner ports
Blocked orifice Check orifice opening
Faulty Valve
Replace Valve
Burner does not light but pilot remains on Low gas pressure Check gas supply pressure
Clogged or dirty burner ports Clean burner ports
Blocked orifice Check orifice opening
Faulty pilot or thermocouple
Replace Safety Pilot
Faulty Valve
Replace Valve
Burner lights but does not stay lit Low gas pressure Check gas supply pressure
while pilot remains on
Faulty Valve
Replace Valve
Faulty pilot or thermocouple
Replace Safety Pilot
Clogged or dirty burner ports Clean burner ports
Burner & pilot light but will not stay on Low gas pressure Check gas supply pressure
Not enough fresh air for pilot Open door or window - ventilate
Faulty Valve
Replace Valve
Faulty pilot or thermocouple
Replace Safety Pilot
Clogged or dirty burner ports Clean burner ports
Remote control overheating
Move away from flame
Remote control batteries failing
Replace batteries
Incorrect burner flame Incorrect gas supply or pressure Check gas supply pressure
Blocked orifice Check orifice opening
Clogged or dirty burner ports Clean burner ports
Faulty Valve
Replace Valve
High altitude Adjust orifice size for altitude
Backfire of burner Blocked orifice Check orifice opening
Clogged or dirty burner ports Clean burner ports
Low gas pressure Check gas supply pressure
Appliance produces unwanted odors Vapors from paint, hair spray, glues, etc Ventilate room
Initial burn off of manufacturing chemicals Ventilate room
Whistle noise from appliance Air in gas line Bleed lines
Control knob not in fully open position Open control knob to full open
Spiral gas flex line Replace gas feed line