3
Flue Damper Clamp NOT OPTIONAL !
!!!
WARNING
!!!
The damper clamp,
must be installed,
in a manner,
which will
maintain the minimum permanent damper vent opening at all
times. SEE FIGURE 1. See the Decorative Hearth System
Specifications on page 3.
!!!
WARNING
!!!
The
State of Massachusetts requires that the chimney flue
damper, when used with decorative gas appliances, be welded
open or completely removed. In the Commonwealth of
Massachusetts, this appliance must be installed by a licensed
plumber or gasfitter.
!!!
WARNING
!!!
Improper installation, adjustment, alteration, service or
maintenance, can cause property damage, personal injury or
ORVVRIOLIH5HIHUWRWKHRZQHU¶VLQIRUPDWLRQPDQXDOSURYLGHG
with this appliance. Installation and service,
must be
performed,
by
a qualified installer, service agency or the gas
supplier.
HIGH ALTITUDE DERATE
In the U.S.A., input BTU shall be de-rated 4% ( 1 orifice size )
per 1000 ft. for altitudes above 2000 ft.. In Canada, input BTU
shall be de-rated 10% ( 2 orifice sizes ) at altitudes from 2000
ft. to 4500 ft..
A Front Width = Minimum 6" larger than unit size
B Center Width = Not Less than unit size
C Depth = All Verona Burners are 8.5 inches deep
D Height = Minimum 16"
FIGURE 1
Summary of Contents for VERONA
Page 7: ......