Befestigungs-
scheibe
Position 24a
Parts are in
bag L
Position 23
Parts are in
bag L
Disk
Ø 5,3
Screw
5x14
Screw
5x14
Alloy
engine
mount
Screw
5x12
Fixing disk
Fuel hoses
Upper tank
mount
Lower tank
mount
Tank complete
Position 24
Parts are in
bag L
Disk
4,2x16
Tank with mount
assembled
Fixing disk
Mount the pre-assembled engine with manifold and air filter in-
to the chassis.Fix the engine with the M5x12 countersunk screws
and engine fixing disks to the chassis.
Mount the alloy engine mount to the engine and the alloy rear
axle carrier using M5x14 pan-head screws, M5x14 hexagon screw
and disks Ø5.3.
Hint:
At first, only slightly tighten the engine screws and the
screws for the engine mount. Tighten all screws later when the
complete unit is mounted (in order to avoid warping).
Fix the tank mount complete to the tank as
described in position 24a.
Mount the complete tank at the tank mount
to the CFRP chassis side part using 4,2x16
countersunk screws and fixing disks.
Place the fuel hoses as illustrated on the
following pictures and shorten their length
accordingly. Carefully twist the angle con-
nection at the carburetor for the yellow fuel
hose.