Festo VTSA Series, Manual

Page: 123 / 166

5. Maintenance and conversion
5−15
Festo P.BE−VTSA−44−EN en 0601a
3. Loosen the screws of the components (manifold block,
pneumatic supply plate or right−hand end plate) which
you wish to dismantle in the sequence
1
,
4
,
3
,
2
(see Fig.5/3).
4. Then remove the screws. The loosened manifold blocks
are now held together only by the electrical linking or by
the bus.
1
2
3
4
Width across flats of the hexagon socket wrench SW4
Fig.5/3: Position of the screw connectors as example on
the right−hand end plate
5. Pull the relevant component away from the neighbouring
component.