Festo VTSA Series, Manual

Page: 120 / 166

5. Maintenance and conversion
5−12
Festo P.BE−VTSA−44−EN en 0601a
Removing the components
1. Unscrew the screws of all components above the relevant
position.
2. Remove these components from the valve location.
Fit new components
1. Check the seals for damage. Replace the seals if they are
damaged.
2. Place the new component on the valve location or onto a
component already fitted.
3. Fasten the new component. Width across flats of the
hexagon socket wrench see Tab.5/4.