EPCO
20
Festo – EPCO-Z6 – 1202NH English
•
Compare the limit values specified in these operating instructions with those of your application
(e.g. forces, torques, temperatures, masses, speeds). The relevant safety regulations can only be
adhered to by ensureing the product is operated in compliance with the load limits.
•
Take the tolerance of the tightening torques into account. Unless otherwise specified, the tolerance
is ±20 %.
5
Installation
5.1
Mechanical assembly
•
Do not modify the screws and threaded pins if not directly requested to do so in these operating
instructions.
Note
Excessive tensile loads may cause the threaded holes to be pulled out.
•
In the event of high loads make sure that the EPCO is secured at other mounting
points in the grooves
7
in addition to the front mounting threads
5
.
•
Make sure that the device is fitted free of mechanical stress
and distortion (evenness of the bearing surface: ≤ 0.2 mm).
•
Position the EPCO so that all of the control sections are
accessible.
•
Secure the EPCO with the mounting accessories
(
10 Accessories).
•
Tighten the screws evenly.
Fig. 2
5
7
Size
16
25
40
Direct mounting
5
Female thread front side
M4
M5
M6
Max. tightening torque
[Nm]
3
4
5
Slot nut mounting
7
Spanner Size
ß
2.5
2.5
4
Max. tightening torque
[Nm]
1.2
1.2
5.9
Tab. 1
Summary of Contents for EPCO-16
Page 75: ...EPCO Festo EPCO Z6 1202NH 75 3 EPCO 5 kg 4 20...
Page 78: ...EPCO 78 Festo EPCO Z6 1202NH EPCO A EPCO 10 20 mm Fig 5 5 2 ESD EPCO 1 2 EPCO Festo 10...
Page 80: ...EPCO 80 Festo EPCO Z6 1202NH 6 EPCO Fig 6 EPCO Festo PositioningDrives www festo com...
Page 82: ...EPCO 82 Festo EPCO Z6 1202NH 7 EPCO Fig 7 8 EPCO Festo LUB KC1...
