Festo DGE-25 ZR RF Series, Repair Instructions

Page: 9 / 68

9 / 48 Festo 7DGE_25-63_ZR_KFb_en
Item Designation Type Note
1 Socket head screw DIN 912-M4×40-8.8 Tightening torque 2.9 Nm
2 Sealing cap
3 Coupling housing
4 Centring ring
5 Coupling housing module See operating instructions for assembly
6 Socket head screw DIN 912-M4×12-8.8 Tightening torque 2.9 Nm
(with coupling KSE-30-35-… and EAMC-30-35-…)
7 Coupling
8 Coupling module See operating instructions for assembly
9 Retaining ring I 30×1.2 DIN 472
10 Flange screw M5×58 Tightening torque 6.0 Nm, use LOCTITE 243
11 Drive cover
12 Clamp piece
13 Threaded pin DIN 913-M5×6-45H Tightening torque 2.0 Nm
14 Socket head screw DIN 912-M3×8-8.8 Tightening torque 1.0 Nm
15 Cover
16 Clamping sleeve DIN 7346-4.5×16
17 Buffer
18 Gear drive Without drive trunnion, with pressed-on deep-groove ball
bearings
19 Gear drive 1 drive trunnion, with pressed-on deep-groove ball bearings
20 Gear drive 2 drive trunnions, with pressed-on deep-groove ball bearings
21 Cylinder barrel
22 - 25 Cover strip
26 - 28 Slot nut
29 - 30 Guide rail
31 Socket head screw DIN 912-M4×8-8.8 Tightening torque 2.9 Nm
32 Cover cap
33 - 34 Guide rail module
35 Socket head screw DIN 7984-M3×12-8.8 Tightening torque 1.2 Nm, use LOCTITE 243
36 Threaded pin DIN 913-M4×5-45H Use LOCTITE 243
37 - 38 Slide
39 Threaded pin DIN 913-M12×14-45H
40 - 41 Hexagon pin
42 Bearing cartridge
43 - 44 Slide module
45 Pin
46 Moment compensator
47 Countersunk screw DIN 7991-M5×35-8.8 Tightening torque 5.9 Nm
48 Piston with slide module
49 - 52 Toothed belt
53 Clamping plate
54 Socket head screw DIN 912-M4×25-8.8
55 Clamp piece
56 Magnet
57 Clamp piece module
58 Cylindrical dowel pin DIN 7-M6×10
59 Guiding band
60 Sealing lip
61 Band guide
62 Piston
63 Piston module
64 Countersunk screw DIN 7991-M5×8-A2-70 Tightening torque 4.0 Nm
65 Pin
66 Scraper
67 Compression spring
68 Adapter