Festo DGE-25 ZR RF Series, Repair Instructions

Page: 13 / 68

13 / 48 Festo 7DGE_25-63_ZR_KFb_en
Item Designation Type Note
1 Socket head screw DIN 912-M8×90-10.9 Tightening torque 24.0 Nm
2 Sealing cap
3 Coupling housing
4 Centring ring
5 Coupling housing module See operating instructions for assembly
6 Socket head screw DIN 912-M8×25-10.9 Tightening torque 25.0 Nm
(with coupling KSE-65-90-… and EAMC-65-90-…)
7 Coupling
8 Coupling module
9 Retaining ring I 62×2 DIN 472
10 Flange screw M8×125 Tightening torque 15.0 Nm, use LOCTITE 243
11 Drive cover
12 Clamp piece
13 Threaded pin DIN 913-M5×6-45H Tightening torque 3.0 Nm
14 Socket head screw DIN 912-M4×12-8.8 Tightening torque 2.0 Nm
15 Cover
16 Buffer
17 Gear drive Without drive trunnion, with pressed-on deep-groove ball
bearings
18 Gear drive 1 drive trunnion, with pressed-on deep-groove ball bearings
19 Gear drive 2 drive trunnions, with pressed-on deep-groove ball bearings
20 Cylinder barrel
21 - 22 Cover strip
23 - 26 Slot nut
27 - 28 Guide rail
29 Socket head screw DIN 912-M5×20-8.8 Tightening torque 5.9 Nm, use LOCTITE 243
30 Cover cap
31 - 32 Guide rail module
33 Socket head screw DIN 7984-M6×16-8.8 Tightening torque 9.9 Nm, use LOCTITE 243
34 Threaded pin DIN 913-M5×6-45H Use LOCTITE 243
35 - 36 Slide
37 Threaded pin M16×1.5×18
38 - 39 Hexagon pin
40 Bearing cartridge
41 - 42 Slide module
43 Pin
44 Moment compensator
45 Countersunk screw DIN 7991-M8×40-8.8 Tightening torque 24.0 Nm
46 Piston with slide module
47 - 48 Toothed belt
49 Clamping plate
50 Clamp piece
51 Magnet
52 Clamp piece module
53 Cylindrical dowel pin DIN 7-M6×45
54 Socket head screw DIN 912-M5×50-12.9
55 Washer DIN 433-5.3
56 Guiding band
57 Sealing lip
58 Band guide
59 Piston
60 Piston module
61 Countersunk screw DIN 7991-M6×10-A2-70 Tightening torque 8 Nm
62 Spring pin DIN 7344-M6×22
63 Pin
64 Scraper
65 Compression spring
66 Adapter