28
Festo — CPX-AP-A — 2022-07
Diagnostics
8.2
Configuring the settings at the interface
•
If necessary, configure the settings using the control elements on the interface.
Detailed information on the control elements of the applicable interface
è
Product-specific documentation
8.3
Testing function without higher-order controller
1. Switch on PS and PL power supplies.
2. Test the response of the automation system CPX-AP-A:
–
Connected actuators
–
LED displays
The following LED displays must be green:
–
[SD] system diagnostics, only available for interfaces
–
[MD] module diagnostics, available for all modules
–
[PL] voltage PL, only available for interfaces, electrical interfaces and modules with outputs
8.4
Commissioning in network with higher-order controller
Information on commissioning on the network
è
Instruction manual for the applicable interface
9
Parameterisation
Various parameters are available to adapt the automation system CPX-AP and the modules to the
application and to access the corresponding data.
Detailed information on the parameters
è
Product-specific documentation
10
Diagnostics
10.1
Diagnostics options
Various options are available for error diagnostics, depending on the parameterisation and network
protocol used:
–
LED displays on the product
–
Internal system diagnostics
–
Diagnostics via the host system (protocol-specific mapping of the internal system diagnostics)
