Festo CPX-2AA-U-I, Electronic Manual

Page: 81 / 228

2. Analogue input module CPX−2AE−U−I
2−37
Festo P.BE−CPX−AX−EN en 0503b
2.5.3 Fault treatment and parametrizing
The following diagrams show the fault treatment in the ana
logue input modules. Further registering and display of the
fault can be suppressed as desired with the appropriate
module parameter, represented in the diagram as a switch.
A description of the parameter can be found in section 2.4.3.
2
Fault message
to field bus node
Fault no. 3
Wire fracture at
current input
channel 0
Monitoring
Wire fracture
channel 0
Module
error LED
3 1
0 1
Fault no. 15
Module
defective
Monitoring
Short circuit
at sensors
0 1
Fault message
to field bus node
Module
error LED
Fault no. 2
Short circuit/
overload in
sensor supply
Fault no. 3
Wire fracture at
current input
channel 1
Monitoring
Wire fracture
channel 1
0 1
1
Module parameters (switch position represented = default setting)
2
Module−specific faults
3
Channel−specific faults
Fig.2/9: Principle of fault treatment and parametrizing of the analogue input modules
part 1