Festo CP-AM-MEAS, Original Operating Instructions

Page: 62 / 94

Operation
62
© Festo Didactic 8154245 en
8 Operation
NOTE
– The distance between interface (C) and distance sensor (A/B) has been set ex
works to 200…250 mm.
NOTE
– All application-specific information is described in this user manual. The general
operation of a station, however, is described in the manuals of the basic
modules. The information is essential when you intend to operate the CP
application module Measuring as a station together with a basic module CP
Factory or a basic module CP Lab Conveyor.
An application module has no control elements. Operation of the application module is only possible when it
is mounted on a basic module of the CP-Lab or CP-Factory system.
The operation of the application module can be realized by every customer according to his wishes, the
supplied programs are only an operating suggestion with which the application module is on CP-Lab
or CP-Factory System can be operated. Own operating concepts or external controls are also possible.
If the application module is mounted on a CP Lab or a CP Factory basic module, the general operation for
this is described in the manuals of the CP Lab or CP Factory system. All application-specific information is
described in this manual for the application module.
8.1 Function signal lamp
Red – current test result is incorrect, the recorded measured value is beyond the defined limits.
Yellow – application is busy, measurement is being taken.
Green – measurement was successful, test result is within the defined limits.