CESA-GW-AS-PB Description
67
9.
System startup using AS-i Control Tools
The Windows based software "AS-i Control Tools" with a serial interface for stain-
less steel AS-i masters is designed to make the startup of the AS-i 3.0 PROFI-
BUS Gateway as comfortable as possible.
Additionally, the software communicates with the AS-i 3.0 PROFIBUS Gateway
by using a PROFIBUS DP Master Simulator DP/V1 or the serial PROFIBUS mas-
ter.
9.1
Windows software AS-i Control Tools
This way, the device driver is copied into the previous designed folder in AS-i
Control Tools and should be recognized automatically.
The Windows software "AS-i Control Tools" enables the user to easily configure
the AS-i network.
1.
Plug the PROFIBUS Master Simulator or a serial PROFIBUS Master,
respectively, into the D-SUB connector of the AS-i/PROFIBUS Gateway
and connect the device to the PC via its serial interface.
2.
Start AS-i Control Tools.
3.
Select Master | New.
4.
Choose PROFIBUS as the protocol.
5.
Select the appropriate settings (for example serial interface COM 2, station
address <auto>).
Information!
AS-i Control Tools must be installed first!
Summary of Contents for CESA-GW-AS-PB
Page 1: ...Description AS i Gateway English Gateway AS i PROFIBUS CESA GW AS PB 749962 1002NH ...
Page 2: ......
Page 4: ......