EC Directive
Title
2011/65/EU
RoHS Directive
Tab. 13 EC Directives
13.1.2
Standards
The following standards have been used to check the conformity of the handheld terminal
CDSA-D3-RV with the directives.
Checking conformity with the Machinery Directive
Standard
Title
EN ISO 13850:2015
Safety of machinery - Emergency stop - Principles for design
EN 60204-1: 2006 + A1: 2009 +
AC: 2010, Chapters 9 and 10
Safety of machinery - Electrical equipment of machines - Part 1:
General requirements
Tab. 14 Standards
Checking conformity with the EMC Directive
Standard
Title
EN 61131-2: 2007, Chapters 8,
9 and 10
Programmable logic controllers - Part 2: Equipment requirements
and tests
Tab. 15 Standards
Other standards
When drafting the safety concept, the following legally non-binding European standards were addi-
tionally consulted for partial aspects:
Standard
Title
General Procedures and safety principles
EN ISO 12100:2010
Safety of machinery - General principles for design - Risk assess-
ment and risk reduction
Design of the 3-position enabling switch
EN 60204-1:2006 + A1:2009 +
AC:2010
Safety of machinery - Electrical equipment of machines - Part 1:
General requirements
EN ISO 10218-1:2011
Industrial robots – Safety requirements – Part 1: Robots
EN 60947-5-8:2006
Low-voltage switching devices - Part 5-8: Control units and switch-
ing elements - Three-position enabling switch
EN 60947-1:2007
Low-voltage switching devices - Part 1: General specifications
EN 60947-5-1:2004
Low-voltage switching devices - Part 5-1: Control units and switch-
ing elements - Electromechanical control units
Technical data
38
Festo — CDSA-D3-RV — 2020-08
