Festo ADN-EL Series Repair Instructions Download Page 32

Page: 32 / 36

32 / 36

Festo 7ADN-KP_ADN-ELa_en

•

Push the bearing cap over the mounting sleeve (see chapter

9.2 "Special

tools"

) onto the piston rod.

•

Apply the screw locking agent included in the set of wearing parts to the
screws and screw these through the bearing cap and intermediate cap (only
ADN-20 / 25-…-ELB / ELV) into the cylinder barrel.

•

Align the bearing cap and intermediate cap (only ADN-20 / 25-…-ELB / ELV)

flush with the cylinder barrel.

•

Tighten the screws using the appropriate torque (see table).

Type

Torque

Flange screw

ADN-20-…-ELB / ELH / ELV

9 Nm

ADN-25-…-ELB / ELH / ELV

9 Nm

ADN-32-…-ELB / ELH / ELV

27 Nm

ADN-40-…-ELB / ELH / ELV

27 Nm

ADN-50-…-ELB / ELH / ELV

35 Nm

ADN-63-…-ELB / ELH / ELV

35 Nm

Socket head screw

ADN-80-…-ELB / ELV

12 Nm

ADN-80-…-ELH

8 Nm

ADN-100-…-ELB / ELH / ELV

9 Nm

6.6

Reestablishing the functionality of the locking cylinder

6.6.1

Assembly of the locking cylinder following disassembly

•

Only with ADN-20 / 25-…-EL

–

Insert the spacer ring in the locking cylinder fixture in the intermediate

and/or end cap.

•

Screw the locking cylinder into the relevant cover and tighten it with the
corresponding torque (see table).

Type

Torque

ADN-20-…-ELB / ELH / ELV

2.0 Nm

ADN-25-…-ELB / ELH / ELV

3.0 Nm

ADN-32-…-ELB / ELH / ELV

3.0 Nm

ADN-40-…-ELB / ELH / ELV

3.0 Nm

ADN-50-…-ELB / ELH / ELV

5.0 Nm

ADN-63-…-ELB / ELH / ELV

5.0 Nm

ADN-80-…-ELB / ELH / ELV

10.0 Nm

ADN-100-…-ELB / ELH / ELV

10.0 Nm

Note

Ensure that the end-position locking is released (see chapter

6.6.2 "Releasing the end-position locking"

Summary of Contents for ADN-EL Series





































Search results

Summary of Contents for ADN-EL Series

Reviews:

Related manuals for ADN-EL Series

Brands by name

Popular brands

Festo ADN-EL Series, Repair Instructions

Search results

Summary of Contents for ADN-EL Series

Reviews:

Related manuals for ADN-EL Series

Brands by name

Popular brands