Festo 8024918, Repair Instructions

Page: 32 / 54

32 / 54 Festo 7ELGA-BS-KFa_en
5. Apply a thin film of grease on the roller bearing with seat in the bearing
block on the inner raceway.
Note
When installing the angular ball bearing (ELGA-BS-KF-80 / 120 / 150) ensure
that the wider outer raceway face is
always pointed towards the bearing
block.
Note
When pressing on the roller bearing, ensure that it does not tilt and become
damaged.
6. Mount the roller bearing with seat in the bearing block (

Chapter 4.3.5.1
on page 29 ).
4.4 Mounting the spindle axis
4.4.1 Greasing during assembly
• Grease the following parts as described.
Component Lubricant Greasing instructions
Spindle assembly Festo LUB-KC1
1)
Grease all round.
Roller track Festo LUB-KC1
1)
Grease the entire length.
Roller carriage Festo LUB-KC1
1) 
Chapter 7.4 on page 51
1)
For further information, refer to the information brochure: “Accessories, equipment and
tools” . The brochure can be found in the online spare parts catalogue on the Festo website
(

http://spareparts.festo.com/xdki/data/SPC/0/PDF_SAFE/Fitting%20aids.pdf ).
4.4.2 Mounting the retainer or retainer module with spindle assembly on the slide module
Requirement
The spindle assembly is mounted in the retainer or in the retainer module (

Chapter 4.3.4 on page 28 ).
Depending on the size, the spindle assembly for spindle axes ELGA-BS-KF-70 /80 / 120 / 150 is mounted on the slide
module with a different number of socket head screws:
– ELGA-BS-KF-70 / 80 / 120: two socket head screws,
– ELGA-BS-KF-150: four socket head screws (2× M8×70 and 2× M8×118,
 Chapter 3.4 on page 18 ).
1. Place the slide module on the work surface with the attachment side facing
downwards. The lubrication nipples face the front.