48 / 54
Festo 7ELGA-BS-KFa_en
11. Use two socket head screws to screw the sensor bracket with measuring
unit onto the slide module and tighten with the appropriate tightening
torque.
Size
Tightening torque
ELGA-BS-KF-70
5 Nm
ELGA-BS-KF-80
5 Nm
ELGA-BS-KF-120
5.9 Nm
ELGA-BS-KF-150
5.9 Nm
12. To obtain precise position information, the measuring unit must comply
with the tolerances listed in the following for the distance and angle
between the measuring unit and the measuring tape:
• The measuring unit
2
must be set on attachment with a distance
X
of
0.1 mm to 2 mm from the magnetic strip
1
.
– The offset between the measuring unit and the horizontal middle axis of the
magnetic strip
1
must not exceed Y = 2.5 mm.
1
2
– The inclination between the measuring unit
2
and the magnetic strip
1
must not exceed ±5°.
1
2
– The deviation in the parallelism between the measuring unit
2
and the
magnetic strip
1
must not exceed ±5°.
1 2
– The deviation in the parallelism between the measuring unit
2
and the
magnetic strip
1
must not exceed ± 1.5°.
1
2
Summary of Contents for 8024918
