36 / 54
Festo 7ELGA-BS-KFa_en
12. Insert the lubricating channels into the lubrication holes of the lubricating
heads.
The O-ring must lie flush on the lubricating heads and lubricating channels.
Note
During mounting on the slide module, the roller carriages must not be
pushed off the assembly tools.
Note the alignment of the roller carriage
1
on assembling!
The ground sides of the roller carriages
4
must be installed facing the stop
edge
2
of the slide module
3
.
2
2
4
1
2 1
3
1
13. Wet the mounting holes in the roller carriages with screw locking agent.
14. Place the roller carriages with the assembly tool on the slide module, the
ground side of the roller carriages faces the stop edge of the slide module
and the assembly tool faces upwards.
15. Push the roller carriage onto the free ends of the lubricating channels.
The O-ring must lie flush on the lubricating channel and on the roller
carriage.
16. Carefully turn over the slide module with spindle assembly and the roller
carriages and place on the assembly tools; the lubrication nipples face the
front.
17. Screw the socket head screws through the slide module and into the roller
carriages.
18. Press the roller carriages with the ground sides on the stop edge of the
slide module and at the same time tighten the socket head screws with the
appropriate tightening torque.
Size
Tightening torque
ELGA-BS-KF-70
1.5 Nm
ELGA-BS-KF-80
1.5 Nm
19. Use compressed air and a cloth to clean the cylinder barrel and roller track.
Summary of Contents for 8024918
