MACHINES AND
ACCESSORIES
Page 16 of 22
9. If the machine-tool, on which the coolant pump is
installed, is fitted with a used liquid recovery tray,
insert the coolant recovery tubing inside the hole in
the lid of the coolant tank, so that the liquid used
during processing, can be recycled and reused.
Figure 10 – Coolant recovery hole.
10.Connect the yellow-green sheathed cable to the grounding terminal of the machine,
and then connect the electric wires, respecting the supply voltage shown on the
machine's identification plate.
Electrocution
The electrical circuit connections can only be carried out by personnel that are experienced in
this area and specifically trained for this purpose.
fervi.com
