MACHINES AND
ACCESSORIES
Page 8 of 22
2.3 Safety rules for electrical machine-tools
Risks associated with using the machine
1. Do not modify the electrical system in any way. Any attempt in this regard may
jeopardize the operation of electrical devices, thus causing malfunction or accident.
2. Work carried out in the electrical system of the machine must, therefore, be carried out
only by qualified and authorized personnel.
3.
If one hears unusual noises, or feels something strange, immediately stop the machine.
Then carry out an inspection and, if necessary, perform any repairs as required.
1. The supply voltage must correspond to that stated on the label and in the technical
specifications.
2. It is necessary to use a device for the automatic interruption of the power supply in
case of failure, which is to be coordinated with the machine's electrical system. For
more detailed information, contact a trusted electrician.
3. The mains power outlet should be bipolar grounded (10/16 A, 250 V), extension cables
must have sections that are the same or greater than the sections of the power cable
of the machine.
4. Make sure that the power cord does not come into contact with hot objects, wet or
oiled surfaces, and/or sharp edges.
5. The power cord should be checked regularly and before each use to check for signs of
damage or wear. If these are not in good condition, replace the cable.
6. Do not use the power cord to lift the machine or to remove the plug from the socket.
2.4 Technical Support
For any problems or concerns, please contact, without hesitation the Technical Support
Department of your dealer, who has competent and specialised staff, specific equipment and
spare parts.
2.5 Other provisions
I
T IS FORBIDDEN TO TAMPER WITH SAFETY DEVICES
Check the presence and integrity of protections and the proper functioning of safety devices
before starting operation.
If any defect is encountered do not use the machine!
It is absolutely forbidden, therefore, to modify or remove the guards, safety
devices, labels and information plates.
fervi.com
