MACHINES AND
ACCESSORIES
Page 13 of 22
5 INSTALLATION AND OPERATION
The coolant pump is found disassembled in the packaging, as such it is necessary to carry out
assembly before it can be installed on the designated machine. Proceed as follows.
Check that all the components listed below are included in the package before throwing away
the packaging:
Instruction manual
Declaration of conformity
Coolant tank (1)
Electric pump (2)
Electric cable and control box (3)
Coolant passage pipe
Nozzle coolant outlet with shut off valve (4)
Coolant tank lid (5)
Bolts and screws (6)
To recognize the components and to carry out the correct assembly of the
equipment, refer to the picture on page 2 of this manual.
To carry out the assembly of the coolant pump proceed as described below:
1. Insert the electric pump inside the hole present in the
coolant tank, orienting the electric cable towards the right
side of the tank, so that it will not be an obstruction.
Figure 3 - Pump insertion.
fervi.com
