All the rights are reserved, inclusive those of translation. It is forbidden to reproduce completely or
in part this publication without the authorization of the FERRARI GROUP s.r.l.
9
PRELIMINARY OPERATIONS
Preliminary operations
7)
Replace the screws and firmly tighten them
8)
Unscrew the 2 nuts and remove the 15 mm diameter
plunger (see picture)
9)
Insert and screw in the 19 mm diameter plunger (for
champagne corks use the 40 mm long pin, otherwise select
the 55 mm long plunger) with the centering template
included in the kit for big bottles (see picture)
10)
Once adjustments are complete, tighten the 2 nuts
11)
Check that the plunger is centered on the centering
hole when it goes down.
Position the cork in the bottle by screwing or unscrewing the
plunger (see picture)
12)
Remove the centering template
13)
Remove the prism lock pin.
14)
Put the safety guard back on
