All the rights are reserved, inclusive those of translation. It is forbidden to reproduce completely or
in part this publication without the authorization of the FERRARI GROUP s.r.l.
5
Technical specifications and Kit
The overview table below provides an overview of the technical data specifications
for the “Zeus” corker.
The corker is furnished with the following equipment:
N.3
numbered bottle mouth adaptors;
N.1
cork pushing pin ø 15 mm, h 55 mm;
N.1
cork pushing pin ø15 mm, h 40 mm for mushroom corks;
N.1
kit for large bottles (see picture on the right) consisting of:
N.2
5 mm spacers (A photo)
N.1
centering plate (B photo)
N.1
eccentric cork pushing pin, ø19 mm h 55mm (C photo)
N.1
eccentric cork pushing pin, ø 19 mm, h 40 mm,
for mushroom corks (D photo)
N.1
extension rod for bottle height adjustments (E photo)
N.1
Prism lock pin (F photo)
The “overview table 1” includes bottle and cork measurements for the correct
use of the parts included with the corker.
The “preliminary operations” section covers the procedures for assembling the
parts listed above.
Weight
Material
Length
Width
Height
Volume
(kg)
(mm)
(mm)
(mm)
(m3)
43
-Stainless Steel
-Hardened Steel
550
700
1400
0,54
TECHNICAL SPECIFICATIONS AND KIT
(foto A)
(foto C)
(foto E)
(foto F)
