All the rights are reserved, inclusive those of translation. It is forbidden to reproduce completely or
in part this publication without the authorization of the FERRARI GROUP s.r.l.
11
PRELIMINARY OPERATIONS
Preliminary operations
5)
Loosen the 2 screws shown in the picture
6)
Remove the 2 5mm spacers shown in the picture
7)
Put the 2 screws back in
8)
Unscrew the 2 nuts and remove the 19 mm diameter plunger
9)
Screw the 15 mm diameter pin back in (for champagne
head corks use the 40mm long pin, otherwise select the 55mm
long pin) with the 2 lock nuts, adjusting the height desired for the
cork.
10)
Mount adaptor n.1 or n.2 depending on the mouth of the
bottle that you would like to cork (see overview table n.1)
IMPORTANT: The 3 adaptors are suitable for most mouth sizes of off-the-
shelf bottles. However, check that the adaptor is the appropriate size before
proceeding to corking operations (if it is not compatible, please contact the
technical office of FERRARI GROUP SRL and they will be able to produce a
part to meet your requirements)
The 15 mm diameter plunger does not require the centering
template
