All the rights are reserved, inclusive those of translation. It is forbidden to reproduce completely or
in part this publication without the authorization of the FERRARI GROUP s.r.l.
7
PRELIMINARY OPERATIONS
Preliminary operations
When you receive the corker, check that the machine and its accessories match
the list on page 5. Make sure that the product has not been damaged during
transport.
The machine is delivered ready to cork 3 liter bottles with 55 mm
long and ø15 mm plunger and the n.2 bottle mouth adaptor (for
cork measurement see “overview table 1”.
If specifically requested, the corker can also be calibrated for a different sized bottle.
For all other types of bottles follow the operations listed below.
To adjust the height of the platform simply screw or unscrew the black
adjustment knob located on the lower front right hand side. If necessary, mount
the extension rod provided with the machine (see “overview table 2”).
Adjustment
knob
Extension rod
for platform
extender
Preliminary operations
When you receive the corker, check that the machine and its accessories match
the list on page 5. Make sure that the product has not been damaged during
transport.
The machine is delivered ready to cork 3 liter bottles with 55 mm
long and ø15 mm plunger and the n.2 bottle mouth adaptor (for
cork measurement see “overview table 1”.
If specifically requested, the corker can also be calibrated for a different sized bottle.
For all other types of bottles follow the operations listed below.
To adjust the height of the platform simply screw or unscrew the black
adjustment knob located on the lower front right hand side. If necessary, mount
the extension rod provided with the machine (see “overview table 2”).
Adjustment
knob
Extension rod
for platform
extender
Preliminary operations
When you receive the corker, check that the machine and its accessories match
the list on page 5. Make sure that the product has not been damaged during
transport.
The machine is delivered ready to cork 3 liter bottles with 55 mm
long and ø15 mm plunger and the n.2 bottle mouth adaptor (for
cork measurement see “overview table 1”.
If specifically requested, the corker can also be calibrated for a different sized bottle.
For all other types of bottles follow the operations listed below.
To adjust the height of the platform simply screw or unscrew the black
adjustment knob located on the lower front right hand side. If necessary, mount
the extension rod provided with the machine (see “overview table 2”).
Adjustment
knob
Extension rod
for platform
extender
