All the rights are reserved, inclusive those of translation. It is forbidden to reproduce completely or
in part this publication without the authorization of the FERRARI GROUP s.r.l.
15
STORAGE AND DEMOLITION
Storage and Demolition
If the machine is kept in storage for an extended period of time, store it in an area
protected from rain and wind and, if possible, in a dry area.
Do not expose the machine to temperatures that are less than -10°C or greater than
+ 60°C.
It is forbidden to leave the machine or parts of the machine on
structures that have not been especially designed for it.
Do not leave material or tools on the machine.
Machine Disposal
Any waste resulting from dismantling the machine must be disposed of in an eco-
friendly manner, thus avoiding ground, air, and water pollution.
In any case, you must comply with all local laws in force on waste disposal.
We would like to remind you that waste is defined as any type of substance or
object which the holder disposes of or is required to dispose of (Legislative Decree
n.22 of 5 February 1997 and Legislative Decree n. 389 of 8 November 1997).
Waste resulting from the dismantling of the machine is classified as special waste.
Demolition Materials
These are non-hazardous special waste that can be recovered, in accordance
Ministerial Decree 5 February 1998
•
Ferrous materials, aluminum, stainless steel, copper;
•
Plastic materials;
•
Electronic cards;
•
Electric conductors.
Information on proper waste management
Ferrous materials:
As this type of material can be recycled (secondary raw
materials) it should be delivered to the appropriate authorized collection center.
Plastic materials;
Recycling is permitted, if provided.
This type of material should be disposed of in urban waste type landfills.
Incineration is permitted in facilities equipped with post combustion and dust control
systems before release into the environment
