manualshive.com logo in svg

Ferrari 2012 F12 Berlinetta, Owner'S Manual

Share
Download
Ferrari 2012 F12 Berlinetta Owner'S Manual Download Page 84

84

About your Vehicle

Capless filler neck

This vehicle has a capless filler neck for fuelling. This system allows 

you to refuel by opening the fuel filler flap and simply placing the 

nozzle in the filler neck without having to unscrew a cap.
Two flaps placed in series, both with airtight seals, act as a cap. 

The external flap is locked by a series of “teeth” and the only way 

to open the external flap correctly is by inserting a petrol pump 

nozzle.

Warning 

Place the nozzle in the filler neck carefully to avoid damaging 

the device seal.
Do not try to open the external flap of the filler neck by pushing 

it with your fingers or lever it open using unsuitable tools (e.g. 

screwdrivers). This may damage the external flap mechanism 

and the seal, or generate sparks that could cause a fire if fuel is 

present.

Warning 

Do not overfill the fuel tank: this may cause the fuel to leak out.
After fuelling, wait for about 5 seconds before slowly removing 

the nozzle from the filler neck: in this way, the last drops of fuel 

will flow into the tank and will not drip onto the vehicle.

Warning 

Do not place funnels or portable container nozzles in the filler 

neck.
If you need to refuel from a portable fuel container, use only the 

funnel in the tool kit (see page 198) that releases the automatic 

closing device.

Summary of Contents for 2012 F12 Berlinetta











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands