manualshive.com logo in svg

Ferrari 2012 F12 Berlinetta, Owner'S Manual

Share
Download
Ferrari 2012 F12 Berlinetta Owner'S Manual Download Page 14

14

General

Vehicle keys

The vehicle is delivered with two identical keys that can be used 

for:
- central door locking;
- starting the vehicle;
- activating/deactivating the alarm system;
- opening the luggage compartment lid.

Important note 

If the keys are lost or stolen, you can request a duplicate from 

the 

Ferrari Service Network 

(see the “Duplicating the keys” 

section on page 16).

Key codes

A CODE CARD is supplied together with the keys, indicating the 

following:
- the electronic code;
- the mechanical code for the keys, to be given to the 

Ferrari 

Service Network

 if you request duplicates of the keys.

Warning 

The code numbers on the CODE CARD must always be kept in 

a safe and protected place, not accessible to others.

Important note 

In the event of a change of ownership, it is essential that the 

new vehicle owner is provided with all the keys and with the 

CODE CARD.

Summary of Contents for 2012 F12 Berlinetta











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands