Ferrari 2012 F12 Berlinetta, Owner'S Manual

Page: 144 / 266

144
About your Vehicle
Driving the vehicle
Running-in
The latest manufacturing techniques have allowed us to achieve
high precision and accuracy levels in the construction and assembly
of components. Nonetheless, the vehicle movable parts undergo a
settling process, basically during the first hours of operation.
Engine and transmission
Avoid exceeding 5,000 RPM for the first 1,000 km (620 mi).
After starting, do not exceed 4,000 RPM until the engine has
warmed up (oil temperature: 65-70 °C / 149-158 °F).
Do not let the engine run at a constantly high speed for a
prolonged time.
Warning
BEFORE YOU DRIVE
Check that the seat belts are fastened
Check that the doors are closed
Check that the seat is properly adjusted
Check rear-view mirror adjustment
(central and sides).
Before a trip
Preliminary checks
Check the following at regular intervals and always before long
trips:
- tyre pressure and condition
- levels of fluids and lubricants
- condition of the windscreen wiper blades
- proper functioning of the warning lights and external lights.
Important note
In any case, it is advisable to perform these checks at least every
1000 km (620 mi) and always comply with the maintenance
schedule.
It is also advisable to:
- clean the glass covers of the external lights and all the glass
surfaces
- properly adjust the mirrors, steering wheel, seats and seat belts.
Warning
Use unleaded fuel only!
Using leaded fuel would permanently damage the catalytic
converters.
For specifications and quantities of lubricants and fluids, refer to
the “Refilling” table on page 35.