manualshive.com logo in svg

Ferrari 2012 F12 Berlinetta, Owner'S Manual

Share
Download
Ferrari 2012 F12 Berlinetta Owner'S Manual Download Page 193

193

About your Vehicle

3

Passenger compartment accessories

Glove compartment

This is located on the passenger side of the dashboard. To open it 

press the 

OPEN

 

C

 button: the glove compartment will move down 

slowly by way of a damped opening mechanism.
The glove compartment is illuminated by an internal light that 

comes on automatically when it is opened.

Warning 

Keep the glove compartment closed while driving.

To close the glove compartment, push the top part until you hear 

the click of the lock.

Opening of the glove compartment can be deactivated by pressing 

button 

C

. Recall the MENU screen page on the left hand TFT 

display (see page 90), select the options “Car setup” and “Glove 

box”, then select OFF. To reactivate opening using the button, 

select ON.

Sun visors

The sun visors can be moved by pulling them down towards the 

windscreen and sideways by unhooking them from the fastener and 

turning them towards the door glass.
There is an illuminated mirror on the back of the passenger sun 

visor.

C

Summary of Contents for 2012 F12 Berlinetta











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands