manualshive.com logo in svg

Ferrari 2012 F12 Berlinetta, Owner'S Manual

Share
Download
Ferrari 2012 F12 Berlinetta Owner'S Manual Download Page 157

157

About your Vehicle

3

RACE mode

The RACE mode should be used on the race track. Gearshifting 

favours the racing style of the vehicle whereas the ESC system 

shifts to Level 3 (engine power reductions are minimal) and the 

suspension becomes even stiffer (Level 3). The performance ABS 

shifts to “Sport” level. This mode is designed to ensure stability on 

the race track in high grip conditions.
If “RACE” mode is selected, it is indicated on the left TFT display 

as shown below:

Warning 

Use of the vehicle on race tracks: after each start, cover the 

first straight stretch of the track (at least 500 meters / 0.3 mi) 

at a constant speed so that the traction control system and the 

ABS can calculate exactly how much grip is available and the 

diameter of the tyres (the calculation is reset every time the 

engine stops).
Failure to observe this rule may lead to reduced system 

performance.
The vehicle, which has been designed and produced for road 

use, should only be used occasionally on race tracks.

Summary of Contents for 2012 F12 Berlinetta











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands