Fermax SKYLINE MDS 7460, Technical Book

Page: 12 / 58

Once installed, programming the Digitiser is done via the P and S buttons on its backside.
Via this programming you define the parameters of the panel in which they are mounted, along with other operating
parameters.
It has a DISPLAY with 7 segments that offer visual information to help programming.
This manual indicates which screens are shown on this display in each programming step.
Besides the light indicators, the Digitiser can emit a deep (mook) acoustic tone during programming to indicate an
error in the data-entry, or a high acoustic tone (beep) to indicate that the operation is performed correctly.
Before programming, we have to clearly understand the configuration parameters in order to avoid a malfunction in
the operating system.
These parameters are as follows:
GENERAL ENTRANCE/INTERIOR BLOCK: Within a development we must indicate if the panel is installed as its
GENERAL ENTRANCE, otherwise as a panel installed as a BLOCK entrance INTERIOR.
If installed in an individual building (not a development) it must be considered as an INTERIOR BLOCK.
* The default configuration is INTERIOR BLOCK
* Upon programming a telephone from a panel configured as INTERIOR BLOCK, the number entered is
automatically added to the block number.
For example, if the INTERIOR BLOCK is number 07 and we program a telephone as 23, the number really
programmed is 723.
Likewise, upon making a call from the INTERIOR BLOCK, we mark 23, but the call code is really 723.
From the GENERAL ENTRANCE (which does not add anything), to call this number we have to mark 723.
BLOCK NUMBER: In the case of an INTERIOR BLOCK panel, you must identify in which block it is installed. For this,
each of the panels must be configured with the corresponding BLOCK NUMBER.
* The possible values to assign are 00 to 99. Use sequential numbers starting with 00.
* Default value is 00.
* In the case of panels configured as a GENERAL ENTRANCE, this parameter is not configured.
PROGRAMMING
MDS DIGITIZER REF. 7460
S
+ - D1 D2 2 6
B -
P
S
DISPLAY