Fermax SKYLINE MDS 7460, Technical Book

Page: 5 / 58

ASSEMBLY OPTIONS
* Calls to residences are made by pressing the corresponding call button.
* You can program the phones both sequentially and individually (or
MDS/VDS decoders) for the MDS installations with the VDS).
* You can inversely program the buttons,that is, assign a button to an
already programmed telephone.
* The general parameters may not be configured, even though you can
check the status of said configuration.
* The maximum number of modules to insert depends on the systems
limitation (9999 terminals for MDS installations).
* You can "reset buttons," that is, put all buttons to a default configuration
(with the code "0000"). This is useful if you do not know the current
programming status, and want to start from a known configuration.
* Calls to residences are made by pressing the corresponding telephone
number on the keypad.
* You can program all of the system's configuration parameters.
* You program the telephones and decoders and change the number of a
specific telephone individually.
* You can also open the door by entering a 4 digit code. Even though to
activate this code for the first time you need to access the back of the
panel. You can change it from the keypad itself (without dismounting the
wall panel). This function can be deactivated from the keypad itself. This
way to activate it again, you must access the back of the panel.
* You can restore the system to night mode, in which case you need to put
it in this mode and then it isn't available or accessible at the Central Guard
Unit.
* You can reset the system's configuration parameters to default. This is
useful if want to start from a known status.
Depending on the modules it is combined with (keypad, buttons or both), the Digitiser offers different features.
BUTTON ONLY PANELS
KEYPAD ONLY PANEL
DESCRIPTION OF THE MDS DIGITISER REF. 7460
MDS DIGITIZER REF. 7460
S + - D1 D2 2 6 B -
AMPLIFICADOR 4 + N
4+N AMPLIFIER
AMPLIFICATERU 4+N
4 + N VERSTARKER
VDS/BUS2
CN1
INPUT
OUTPUT
CN2
MDS DIGITIZER REF. 7460
S + - D1 D2 2 6 B -
AMPLIFICADOR 4 + N
4+N AMPLIFIER
AMPLIFICATERU 4+N
4 + N VERSTARKER
VDS/BUS2
CN1
INPUT
OUTPUT
CN2
VDS/BUS2
CN1
INPUT
OUTPUT
CN2