36
Ferm
•
Always switch off the machine first before removing
the plug from the wall socket.
Never use the spindle lock to stop the motor.
TROUBLESHOOTING
1. Machine fails to operate:
•
Power turned off
•
(Extension) cable damaged
2. The elektromotor hardly reaches maximum
speed:
•
The extension cable is too thin and/or too long
•
The mains voltage is lower than 230 V
3. Machine overheats:
•
Air vents are blocked. Clean them with a dry cloth.
•
The machine has been overloaded. Use the machine
for the purpose it is made for.
4. Excessive sparking or elektromotor runs
irregular.
•
There’s dirt inside the motor or the carbon brushes
are worn. Replace the carbon brushes or bring the
machine to a specialized repair centre.
5. SERVICE & MAINTENANCE
MAINTENANCE
Make sure that the plug is removed from the mains when
carrying out maintenance work on the motor.
The Ferm machines have been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon
proper machine care and regular cleaning.
CLEANING
Regularly clean the machine housing with a soft cloth,
preferably after each use. Keep the ventilation slots free
from dust and dirt. If the dirt does not come off use a soft
cloth moistened with soapy water. Never use solvents
such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
LUBRICATION
The machine requires no additional lubrication.
FAULTS
Should a fault occur, e.g. after wear of a part, please
contact the service address on the warranty card. In the
back of this manual you find an exploded view showing
the parts that can be ordered.
ENVIRONMENT
To prevent damage during transport, the appliance is
delivered in a solid packaging which consists largely of
reusable material. Therefore please make use of options
for recycling the packaging.
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
WARRANTY
The warranty conditions can be found on the separately
enclosed warranty card.
We declare under our sole responsibility that this
product is in conformity with the following standards or
standardized documents
EN 50144-1, EN50144-2-3,
EN 55014-1, EN 55014-2,
EN 61000-3-2, EN 61000-3-3
in accordance with the regulations.
98/37/EEC, 73/23/EEC
89/336/EEC
from 01-06-2005
ZWOLLE NL
W. Kamphof
Quality department
CE
ı
DECLARATION OF CONFORMITY
(UK)
Ferm
5
