TS2000 PRINTERS OPERATION MANUAL
The following figure shows the mounting holes of the platen block
d
and
e
. The holes
#3
and
#4
must be used for positioning the platen block. It is recommended to design the bosses for the
positioning holes
#3
and
#4
on the outer case.
*1 : The area of the possible mounting angle (θ
Z
) is different according to the mounting position and distance.
*2 : The area of the possible mounting distance (L
Y
) is different according to the mounting position and angle.
Fig
4.4.
Dimensions for positioning and securing the platen block.
NOTE:
For full design in direct output, see more details in the SEIKO manual (CAPD247D/E,
CAPD347D/E autocutter integrated thermal printer mechanism technical reference).
11/58
Screws
Positioning holes
Cotes in mm
CAPD247
CAPD347
