TS2000 PRINTERS OPERATION MANUAL
n
Printing position
<00>H / <30>H
Not printed
<01>H / <31>H
Above the bar code
<02>H / <32>H
Below the bar code
<03>H / <33>H
Both above and below the code bar
[Notes]
●
HRI indicates Human Readable Interpretation
●
HRI characters are printed using X-scale = 1, Y-scale = 1 and the font specified by
GS f
.
[Default]
n
= <02>H
[Reference]
GS f
,
GS k
GS
I
n
[Name]
Firmware version transmission
[Format]
ASCII
GS
I
n
Hex
1D
49
n
Decimal
29
73
n
[Range]
n
= <33>H
[Description]
●
Transmits the firmware version number.
●
Besides of checking the firmware version by printing the self-test page, this command
can be used as support for possible automatic firmware upgrade through the host
application. Thus, the system could check whether the current version is less than
the new provided (contact with FENIX IMVICO or distributor if necessary).
●
Returns one byte indicating numerically the current firmware version and revision (1
st
and 2
nd
index. 3
Rd
index indicates the boot firmware version and it is not transmitted
by this command
Example:
GS
L
nL
nH
[Name]
Set left margin
[Format]
ASCII
GS
L
nL
nH
Hex
1D
4C
nL
nH
Decimal
29
76
nL
nH
[Range]
<00>H
≤
nL
≤
<FF>H, <00>H
≤
nH
≤
<FF>H
[Description]
●
Sets the left margin using nL and nH.
●
The left margin is set to [(
nL
+
nH
x 256) x 0.125 mm].
[Notes]
●
This command is effective only when processed at the beginning of the line.
●
This commands affects text, graphic and bar code printing.
42/58
FENIX IMVICO
TS2000 V1.0.1
SERIAL PORT SETTINGS
Data bits:
8 (fixed)
Stop bits:
1 (fixed)
Baud rate:
115200 baud
Byte transmitted: 10
Left margin
Printable area
