TS2000 PRINTERS OPERATION MANUAL
*3 : The value when the number of simultaneously activated dots is 288 dots.
*4 : Printer current consumption is different according to motor controlled current. When motor controlled current is 0.26A/phase,
the maximum current consumption is 0.52A.
*5 : When using TL69KS-LH in CAPD347, motor controlled current is 0.375A/phase.
The specifications in the above case are described as below:
・
Motor current consumption is 0.75A max.
・
Cutting frequency is 1cut/2.7s max.
3.8.
MECHANICAL SPECIFICATIONS
Overall dimensions (W x D x H)
See
APPENDIX – MECHANICAL DIMENSIONS
Weight (without paper)
TS2000-60: 420g approx.
TS2000-80: 550g approx.
3.9. RELIABILITY AND
ENVIRONMENTAL CONDITIONS
Operating temperature
(1)
-10 to 50ºC
Storage temperature
(1)
-20 to 60ºC (without paper, in a dry place)
Life span (at 25ºC )
Activation pulse resistance
100 millions pulses or more (print ratio=12’5%).
Abrasion resistance
100 Km or more
Autocutter service life
(20ºC – 45ºC, 10% -65% RH)
1.000.000 cuts or more
(1)
The service life of the print head and autocutter may become shorter if paper other than specified is used.
NOTES:
1
. Life end is defined as the point at which two or more adjacent heat elements are
damaged (when two or more adjacent dots are omitted), except when damaged by
foreign objects or external causes.
2
. The print head life is measured using the specified paper.
3
. The ambient temperature should be kept close to room temperature.
Stop printing when the print head temperature detected by the head thermistor reaches 75
°
C.
Resume printing when the temperature drops down to 70
°
C for lower.
Fig.3.1.
Operating temperature and humidity range.
8/58
