Manual de Instalación
/ Installation Manual
Item
Options
Description
Onboard Serial Port 1
Onboard Serial Port 2
Onboard Serial Port 3
Onboard Serial Port 4
Disable, 3F8/IRQ4
2F8/IRQ3, 3E8/IRQ4
2E8/IRQ3
Select an address and corresponding interrupt
for the first and second serial ports.
Onboard Parallel Port
Disabled, 378/IRQ7,
3BC/IRQ7
Select a matching address and interrupt for
the physical parallel (printer) port.
Parallel Port Mode
Standard, EPP1.9+SPP,
ECP, ECP+EPP1.9,
Printer, EPP1.7+SSP,
ECP+EPP1.7
Select an operating mode for the onboard
parallel port. Select Compatible or Extended
unless you are certain both your hardware
and software support EPP or ECP mode.
ECP Mode Use DMA
1, 3
Select a DMA channel for the port.
PWRON After PWR-Fail
Off, On
Former-Sts
This item is to set whether to run Ac Loss
Auto Restart or off
Power Management Setup
The Power Management Setup allows you to configure you system to most effectively save energy
while operating in a manner consistent with your own style of computer use.
ACPI Function
This item allows you to enable/disable the ACPI function.
•
Disabled.
•
Enabled
(default).
ACPI Suspend Type
This item will set which ACPI suspend type will be used.
•
S1(POS)
(default).
•
S3(STR).
•
S1&S3.
60/71
E
N
G
L
IS
H
