Manual de Instalación
/ Installation Manual
5 – SAFETY PRECAUTIONS
1. Before installing, moving or opening the panel PC, ensure that the power is off and the power
cord is unplugged.
2. Observe ESD precautions when manipulating the components of the panel PC.
3. Do not insert any objects into the ventilation openings of the panel PC.
4. Do not apply voltage levels out of the specified voltage range.
5. Ensure that the power line where the device is going to be connected is protected by a
differential automatic switch to protect humans against indirect electrical contact. A general
automatic switch apart from the panel PC switch is also advisable.
6. Do not use this panel PC in environments where flammable gases are present.
7. Do not shock or hit the panel PC.
8. Do not cover the ventilation openings on the rear side. Doing so will result in overheating the
components and reducing its life.
9. Do not touch the front glass with asharp object
10. Protect the panel PC from direct sunlight, dust, or chemical vapors.
11. Do not use a power cord without earth wire. Do not connect the panel PC to a power socket
which is not properly earthed.
12. Avoid sudden changes in temperature. It could cause condensation inside the panel PC. If it
should happened wait a few hours for water to evaporate.
13. Disconnect the panel PC if it is not going to be used for a long period of time.
43/71
E
N
G
L
IS
H
