Manual de Instalación
/ Installation Manual
Main Menu Selection
Item
Options
Description
Date and Time
Set the system time
IDE Primary Master
IDE Primary Slave
IDE Secondary Master
IDE Secondary Slave
See “IDE Adapter
Setup” Options
Press <Enter> to enter the sub menu of
detailed options
Video
EGA/VGA
CGA 40
CGA 80
MONO
Set the default video device
Halt On
All Errors
No Errors
All, but Keyboard
All, but Diskette
All, but Disk/Key
Select in which case the BIOS should stop
the POST process and notifies the error
IDE Adapter Setup
The IDE adapters control the hard disk drives. There is a unique sub menu for each hard disk
drive. The below table will shows the IDE primary master sub menu.
Item
Options
Description
IDE HDD Auto-detection
Press Enter
Press Enter to auto-detect the HDD on this
channel. If detection is successful, it fills the
remaining fields on this menu.
IDE Primary Master
IDE Primary Slave
IDE Secondary Master
IDE Secondary Slave
None
Auto
Manual
Selecting ‘manual’ lets you set the remaining
fields on this screen.
Access Mode
CHS, LBA
Large, Auto
Choose the access mode for this hard disk
The following options are selectable only if the ‘IDE Channel …’ item is set to ‘Manual’
Cylinder
Min = 0
Max = 65535
Set the number of cylinders for this hard disk.
Head
Min = 0
Max = 255
Set the number of read/write heads
Precomp
Min = 0
Max = 65535
**** Warning: Setting a value of 65535 means
no hard disk
Landing zone
Min = 0
Max = 65535
****
Sector
Min = 0
Max = 255
Number of sectors per track
Advanced BIOS Features
This section allows to configure the system main operation such as set the boot-up sequence,
keyboard behavior, shadowing, security settings and so on.
52/71
E
N
G
L
IS
H
