3.6.
CORRECT POSITIONING OF THE
WORKPIECE IN THE CLAMP
Position the workpiece to be cut directly
between the jaws, without placing any other
object/s between the workpiece and the
jaws.
DANGER - WARNING
TO POSITION FLAT OR SPECIAL
SHAPED PROFILES, PLEASE REFER
TO THE EXAMPLES PROVIDED IN
THE FIGURE.
IF THE THICKNESS OF THE PROFILE IS VERY THIN, TO STOP IT FROM GETTING
CRUSHED IN THE JAWS OF THE CLAMP, PUSH A MOULD INTO THE PROFILE
WHICH MATCHES ITS SHAPE.
3.7.
INSTALLATION AND ADJUSTMENT OF THE BAR HOLDER (Fig. 5A - 5B)
a. Install the guide rod (21) in the hole on the base (13).
b. Tighten the nuts (22).
c. Slacken the handwheel (20) and position the holder (10) at the required distance.
d. Tighten the handwheel (20).
4. USE
DANGER - WARNING
THE MACHINE IS FITTED WITH A MAINS SWITCH (8) (FIG. 1) TO BE ACTIVATED
BEFORE ANY WORK IS PERFORMED. ONCE WORK HAS BEEN COMPLETED,
TURN OFF THE MAINS SWITCH.
DANGER - CAUTION
• NEVER wear gloves when using the machine.
• Before commencing a new job, always remove the cuttings left from the previous
task.
• Keep hands well away from the cutting zone
DANGER - WARNING
RUNNING IN THE BLADE: PERFORM A CORRECT RUNNING-IN PROCEDURE
AS INDICATED IN THE HEADING 5.1 “BLADE REPLACEMENT”
30
EN
Summary of Contents for NG120XL
Page 2: ......
